2025 Catalina 445

$911,769.90

 

GENERAL DIMENSIONS

Length Overall: 44′ 5″

Length of Hull: 43′ 3″

Length at Waterline: 38’ 4″

Beam: 13′ 7″

Distance from Waterline to Masthead: 63′ 10″

 

WING KEEL

Draft: 5′ 0″

Ballast: 8,200 lbs

Basic Weight: 24,500 lbs

 

FIN KEEL

Draft: 6′ 8″

Ballast: 7,200 lbs

Basic Weight: 23,500 lbs

 

RIG MEASUREMENTS

Total with 100% Foretriangle: 856ft  2

Total with Standard 135% Genoa: 1002ft  2

I= 53′ 6″

J= 15′ 8″

P= 51′ 6″

E= 17′ 0″

 

TANKS & CAPACITIES

Water: Forward 50 gal, Port 62 gal, Starboard 56gal

Water Heater: 11 gal

Total Water: 179 gal

Sanitary Holding Tank: Fwd 31 gal, Aft 23 gal

Total Holding: 54 gal

Fuel: 66 gal

 

ENGINE & CONTROLS

Yanmar 4JH57CR, 57 HP @3000RPM

Common Rail, Electronic Diesel

Twin Pedestal Steering with 32″ Stainless Wheel

Single Lever Engine Controls

3 Blade Dynajet 18 x 14

1 1/4″ S.S. Shaft

 

WINDLASS & CHAIN

Quick Rider with 5/16″ Chain Wheel

5/16″ High Test Gd 40 or BBB Gd 30 Chain

 

ANCHOR

CQR – XT 45 S.S. Plow #SP4204

 

All specifications are approximate and subject to change without notice.

Actual equipment also subject to change without notice.

 

 

STANDARD EQUIPMENT

CONSTRUCTION
  • One-Piece Fiberglass Hull with End Grain Balsa Core Sandwich Construction Above the Waterline, and a Vinylester Integral Barrier to Resist Osmosis Blistering
     
  • One-Piece Fiberglass Deck with End Grain Balsa Core and Molded-In Diamond Pattern Non-Skid Surfaces Finished in Two-Tone White and Grey
     
  • One-Piece Fiberglass Deck Liner Finished in NonGlare Texture
     
  • One-Piece Molded Fiberglass Structural Grid
     
  • One-Piece Molded Fiberglass Hull Liner with Satin Finish
     
  • Lead Fin Keel with 316 Stainless Steel Attaching Bolts
     
  • Five Year Gel Coat Blister Protection * ( 2 )
     
  • Five Year Hull Structure Warranty * ( 3 )
     
SPARS & RIGGING
  • Furling Mainsail with Vertical Battens
     
  • 135% Genoa, with U.V, Protection, White
     
  • Complete Standing and Running Rigging, 316 SS
     
  • Internal Pre-Stretched Dacron Halyards
     
  • PVC Wiring Conduit with Messenger in Mast
     
  • Selden In-Mast Mainsail Furling System
     
  • Selden Anodized Double Spreader Mast and Boom
     
SAIL HANDLING & EQUIPMENT
  • ( 2 ) Two-Speed Chrome Self Tailing Primary Winches
     
  • ( 2 ) Two-Speed Chrome Self Tailing Jib Halyard Winches ST Port/Starboard led Aft to a Bank of Sheet Stoppers
     
  • Mainsheet Ball Bearing Gauhauer Block System
     
  • ( 1 ) 10 ” Winch Handle, ball bearing
     
  • Ball Bearing Mainsheet Traveler with Car Adjuster System led to Portside
     
  • Genoa Tracks Inboard with Ball Bearing Low Lead Blocks
     
  • All Halyards led Aft, to Sheet Stoppers
     
  • Headsail Furling System
     
PROPULSION, STEERING & CONTROLS
  • Single Lever Engine Controls Mounted on Starboard Side with Steering Brake in Wheel Hub
     
  • Yanmar ( 4 ) Cylinder Diesel Engine, 54 HP, Fresh Water Cooled with Reduction Gear
     
  • Bronze Propeller, Three Blade
     
  • Sea Water Filter for Engine Cooling
     
  • Centrally Mounted Engine Instruments
     
  • Emergency Tiller Access and Emergency Tiller
     
  • Dual Station Pedestal Steering
     
  • Twin 32 ” Destroyer Wheels
     
  • Bilge Blower and Ventilation System
     
  • Illuminated Compass in Cockpit Table
     
DECK HARDWARE
  • Fiberglass Cockpit Table with ( 2 ) Leaves, Foot- brace, Center insulated Compartment, and Handrails
     
  • Walk Through Stern with Transom Boarding Platform
     
  • Stern Boarding Ladder. Telescopic Type
     
  • 27 ” Double Lifelines with Gates Port and Starboard
     
  • Midship Spring Line Cleats with Chocks
     
  • Molded-In Gel Coat Waterline, Midwatch Blue
     
  • Midwatch Blue and Silver Sheer Stripes
     
  • Large Double Anchor Rollers on Foredeck with Mounting Point for Bowsprit
     
  • Electric Anchor Windlass with Power Up and Down Foot Switches
     
  • Large Divided Anchor Locker for Below Deck Chain and Rode Storage
     
  • Stainless Steel Handrails on Cabin Top
     
  • Stern Rails with Observation Seats, Cup Holders, Outboard Bracket
     
  • LPG Storage Locker for ( 2 ) 10 lb. alum. Tanks
     
  • Hot & Cold Shower Mounted In Transom Boarding Area
     
  • Water-Tight Strike Zone Collision Bulkhead at Bow
     
INTERIOR
  • Varnish Finish On Interior Teak
     
  • Veneer Bulkheads with Solid Teak Trim
     
  • Cabin Window Shades
     
  • Navigation Station with Chart Table with 110 and 12 volt outlets
     
  • Owner’s Stateroom with Large Double Berth, Cedar lined Hanging Locker, Drawers, and Private Head
     
  • Teak and Holly Textured High Pressure Laminate Sole
     
  • Inner Spring Mattresses on Fore and Aft Berths with Custom Fitted Sheets
     
  • LED Interior Lighting
     
  • Main Saloon Features Large Dinette, Gloss Finished Dining Table to Port, Settee Seating Starboard
     
  • Guest Stateroom Aft on Starboard, Features Large Double Berth, Hanging Locker, and Private Access to Head
     
  • Third Cabin Aft to Port, Convertible to Double Berth, Upper/Lower Berths, or Storage Locker
     
  • Dedicated Cabinet for easy access to Engine Filters located in Aft Port Cabin
     
  • Filler Cushion for Conversion of Main Salon Dinning Table to Sleeping Berth
     
GALLEY
  • Front Loading Refrigeration, D.C. Powered with Freezer Compartment
     
  • Top Loading Insulated Compartment, Available as a Second Refrigerator or Freezer
     
  • Polished Double Stainless Steel Sinks
     
  • Large Storage Cabinets over Galley
     
  • Large Storage Lockers with Drawers and Bins
     
  • Gimbaled ( 3 ) Burner L.P.G. Stove w/Oven, Stainless Steel, Oven Hood, Light & Vent
     
  • Multi-Drawer Bank with Utensil Storage Rack
     
  • Microwave Oven, AC Powered
     
  • Single Lever Faucet with Pull-Out Sprayer
     
PLUMBING SYSTEM
  • Pressure Water Distribution System with Filter at Pump and Tank Selection Valves for ( 3 ) Tanks
     
  • 11 Gallon Hot Water Heater with Engine Heat Exchanger and 110V Electric Heating Element
     
  • ( 2 ) Electric Macerating Heads with Holding Tanks and Deck and Thru-Hull Outlets
     
  • Electric Bilge Pump with Float Switch
     
  • Manual Bilge Pump and Bilge High Water Alarm
     
  • Head Compartment Forward with Vanity Counter, Medicine Chest and Shower Compartment Stall
     
  • Head Aft with Vanity, Sink, Medicine Chest, and Shower
     
ELECTRICAL SYSTEM
  • Three Heavy Duty 8-D 12 Volt Marine Deep Cycle Batteries
     
  • 40 Amp Battery Charger, Multi-Bank Automatic
     
  • L.E.D. Running Lights, Fore and Aft
     
  • 110 Volt, 30 AMP Shore Power System
     
  • ( 1 ) 110 Volt, 30 AMP, Shore Power Cord 50 ft.
     
  • L.E.D. Anchor Light at Masthead
     
  • 12 Volt Lighting Throughout
     
  • Custom 115 Volt AC/12 Volt DC Electric Panel
     
  • Circuit Breakers for AC and DC Electrical Panel and Windlass Control
     
  • Shore Power Galvanic Isolator
     
  • Ground Fault Circuit Protection
     
  • A.C. Duplex Receptacles Throughout
     
SAILING INSTRUMENTS
  • Raymarine i70 2-Multi Function Displays with Transducer 1 Mounted at Port and the other at Starboard Helm Stations – Speed, Depth & Wind